A Software Problem; Problems With Ports And Connectors - Lenovo ThinkPad Edge E130 User Manual

Solution: On the Boot menu of ThinkPad Setup, make sure that the hard disk drive is on the Boot priority
order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it on the list and
press the Shift+1 key. This moves the entry to the Boot priority order list.
• Problem: After setting a hard disk password on the hard disk drive of the computer, you moved the drive
to another computer. Now you cannot unlock the hard disk password.
Solution: Your computer supports an enhanced password algorithm. Computers older than yours might
not support such a security function.
A solid-state drive problem
Problem: When you compress files or folders by use of the data compression function in Windows, and then
decompress them, the process of writing to or reading from the files or folders is slow.
Solution: Apply the disk defragmentation tool in Windows for faster access to the data.

A software problem

Problem: A program does not run correctly.
Solution: Make sure that the problem is not being caused by the program.
Check that your computer has the minimum required memory to run the program. Refer to the manuals
supplied with the program.
Check the following:
• The program is designed to operate with your operating system.
• Other programs run correctly on your computer.
• The necessary device drivers are installed.
• The program works when it is run on some other computer.
If an error message is displayed while you are using the program, refer to the manuals supplied with the
program.
If the program still does not run correctly, contact your place of purchase or a service representative for help.

Problems with ports and connectors

The following are the most common problems with ports and connectors.
A USB problem
Problem: A device connected to the USB connector does not work.
Solution: Open the Device Manager window. Make sure that the USB device setup is correct, and that the
assignment of computer resource and the installation of the device driver are correct. Go to Control Panel
and click Hardware and Sound ➙ Device Manager. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
.
Chapter 9 Troubleshooting computer problems
125