Copy Options; Paper Type; Paper Size - Brother MFC-J470DW Basic User's Manual

Chapter 8

Copy options

You can change the following copy settings.
Press COPY, and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
(Basic User's Guide)
For information about changing the following
copy settings, see page 46.


Paper Type



Paper Size

(Advanced User's Guide)
For information about changing the following
copy settings, see Advanced User's Guide:
Copy options.

Quality

Enlarge/Reduce

Page Layout

2in1(ID)

Stack/Sort

Density

Remove Background

2-sided Copy

Set New Default

Factory Reset
NOTE
If you want to sort copies, use the ADF.
46
Paper Type
8
If you are copying on a special type of paper,
set the machine for the type of paper you are
using to get the best print quality.
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press a or b to choose Paper Type.
Press OK.
e
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Size
If you are copying on paper other than A4
size, you will need to change the Paper Size
setting. You can copy only on A4, A5,
Photo (10  15 cm) or Letter paper.
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press a or b to choose Paper Size.
Press OK.
e
Press a or b to choose A4, A5,
10x15cm, or Letter.
Press OK.
f
If you do not want to change further
settings, press Mono Start or
Colour Start.
(COPY).
(COPY).
8
8