Sending A Fax; How To Send A Fax; Outgoing Call - Brother MFC-J470DW Basic User's Manual

4

Sending a fax

How to send a fax

The following steps show how to send a fax.
a
Do one of the following to load your
document:
 Place the document face down in the
ADF. (See Using the ADF
on page 21.)
Load your document face down on

the scanner glass. (See Using the
scanner glass on page 22.)
NOTE
• To send colour faxes with multiple pages,
use the ADF.
• If you send a mono fax from the ADF when
the memory is full, it will be sent in real
time.
• You can use the scanner glass to fax
pages of a book one at a time. The
documents can be up to A4 or Letter size.
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple-page document.
b
Press (FAX).
 The LCD shows:
24
c
You can change the following
fax-sending settings. Press a or b to
4
scroll through the fax settings. When the
setting you want is displayed, press OK
and choose your option.
(Basic User's Guide)
For information about changing the
following fax-sending settings, see
pages 25 to 26.
 Glass Scan Size
 Colour Fax Transmission
 Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax-sending
operations and settings
(See Advanced User's Guide: Sending
a fax (MFC models).)
 Contrast
 Fax Resolution
Set New Defaults

 Factory Reset
 Faxing at the end of a call
 Broadcasting
Real Time Transmission

 Overseas Mode
 Cancelling Waiting Jobs
d
Enter the fax number.
Using the dial pad
Using the Address Book

Address Book
Using call history


Outgoing Call


Caller ID hist.
4