Fax Redial; Additional Dialling Operations; Outgoing Call History - Brother MFC-J470DW Basic User's Manual

Fax Redial

If you are sending a fax automatically and the
line is busy, the machine will redial up to three
times at five minute intervals.
Redial only works if you dialled from the
control panel.
a
Load your document.
b
Press Redial/Pause.
c
Press a or b to choose the number you
want to redial.
Press OK.
d
Press a or b to choose Send a fax.
Press OK.
e
Press Mono Start or Colour Start.
NOTE
In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
Dialling and storing numbers
Additional Dialling
7
Operations

Outgoing Call history

The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
the Address Book, or delete from the history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
b
Press a or b to choose the number you
want.
Press OK.
c
Do one of the following:
 To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
 If you want to store the number,
press a or b to choose
Add to AddressBook.
Press OK.
(See Advanced User's Guide:
Storing Speed Dial numbers from the
Outgoing Call history.)
 If you want to delete the number from
the Outgoing Call history list, press
a or b to choose Delete.
Press OK.
Press 1 to confirm.
d
Press Stop/Exit.
7
7
(FAX).
41
7