MULTIQUIP GAW-135H Operation And Parts Manual page 26

Stopping The Engine
Normal Shutdown
1. Place the main circuit breaker (Figure 11) in the OFF
position.
2. Remove the load from the generator, and let the engine
run at idle for 3-5 minutes with the idle control switch in
the ON position (Up)
3. Place the engine ON/OFF (Figure 24) in the OFF
position.
Figure 24. Operation Switch (Stop)
4. Place the engine fuel valve lever (Figure 25) to the "OFF"
position. "
Figure 25. Engine Fuel Valve Lever (OFF Position)
Emergency Showdown
1. Place the engine ON/OFF switch (Figure 24) in the OFF
position.
PAGE 26 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
GAW-135H — INITIAL START-UP/GENERATOR OPERATION