Welder/Generator Refueling - MULTIQUIP GAW-135H Operation And Parts Manual

DANGER DANGER
DANGER DANGER DANGER
Adding fuel to the tank should be done only when
the engine is stopped and has had an opportunity
to cool down. In the event of a fuel spill, DO NOT
attempt to start the engine until the fuel residue
has been completely wiped up, and the area surrounding the
engine is dry. If generator is placed in a truck bed with a plastic
liner, REMOVE generator from truck bed and place on ground
(Figure 3) to refuel. This possibility exist of fire or explosion due
to static electricity.
PAGE 20 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
GAW-135H — WELDER/GENERATOR REFUELING
Figure 3. Generator/Welder Refueling