Total Access 900e Series Hardware Installation Guide
Rack Mounting Total Access 900e Series
The Total Access 900e Series products are housed in a 1U-high, rack-mountable chassis that can be
installed into 19-inch or 23-inch equipment racks using the brackets shipped with the unit.
The Total Access 900e Series products mount and connect with standard fasteners and hand tools.
ADTRAN recommends 1U (1.75 inches) of separation above and below the
Total Access 900e Series unit. This spacing allows the unit to dissipate heat. The design of
the Total Access 900e Series uses the chassis to distribute heat generated by the unit's
internal cards. This design allows the unit to operate without a cooling fan, ensuring the
overall reliability of the unit.
64243916F1-34A
Figure 4. Wall Mounting the Unit
Copyright © 2010 ADTRAN, Inc.
Unit Installation
23