Total Access 900e Series Hardware Installation Guide
Batteries are retained and prewired in the BBU in a specific pattern. Battery position is maintained by foam
spacers press-fitted against the housing walls. Removing batteries or disconnecting wires compromises
correct reassembly and should not be attempted.
BBU Safety Notices
The BBU should only be used in specified ADTRAN applications.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including that which may cause undesired operation.
Wall Mounting the BBU
Wall Mounting the Total Access 908e BBU (1200641L1)
Figure 5
shows the BBU mounting dimensions for the Total Access 908e.
64243916F1-34A
TOP of Unit
2.734 "
edge-to-center
4.280 "
center-to-center
Figure 5. Wall Mounting the 1200641L1 BBU
Copyright © 2010 ADTRAN, Inc.
Battery Backup Unit
27