Mounting Options - ADTRAN NetVanta 7000 Series Hardware Installation Manual

Unit Installation

Mounting Options

The unit may be installed in rackmount, wallmount, or tabletop configurations. The following sections
provide step-by-step instructions for rack mounting and wall mounting.
Rack Mounting the NetVanta 7100
The NetVanta is a 1U-high, rack-mountable unit which can be installed into a 19-inch equipment rack. The
following steps guide you in mounting the NetVanta 7100 into a rack.
Step
1 Attach the rackmount ears with the screws and brackets supplied in the Rackmount Kit.
2 To allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta 7100 will be positioned.
3 Position the NetVanta 7100 in a stationary equipment rack. This unit occupies 1U of space.
4 Have an assistant hold the unit in position as you install two mounting bolts through the unit's
brackets and into the equipment rack using a #2 phillips-head screwdriver.
5 Apply power to the unit (refer to Supplying Power to the Unit on page 46).
Be careful not to compromise the stability of the equipment mounting rack when installing
this product.
61200796L1-34D
Instructions for Rack Mounting the NetVanta
Copyright © 2006 ADTRAN, Inc.
NetVanta 7000 Series Hardware Installation Guide
Action
44