Advertisement
6. Remove belt from driven pulley and slide shaft
assembly to the right. Remove belt from mower as
shown.
SCAMP MODELS
REPLACEMENT AND SERVICING
SELF-PROPELLED DRIVE BELT
SAFETY WARNING: To prevent start-
ing of engine, disconnect and remove
spark plug prior
to removing the
engine.
3.
Remove three bolts securing engine to muffler
plate and remove engine.
NOTE: Do not remove muffler plate
from housing when removing engine.
4. Remove engine and remove drive belt from drive
pulley.
SAFETY WARNING: Do not operate
mower with belt guard removed.
5. Remove roll pin from left hand drive roller and
remove roller.
Advertisement
