Using The Footswitch For More Presets - Crate GTX212 User Manual

Using the Footswitch for More Presets:

The Crate three-button footswitch supplied with the GTX212 allows access to an
additional DSP preset for each channel of the amplifier. When the footswitch is connect-
ed to the amplifier as shown below, the "original" DSP presets are active for each chan-
nel when the #3 footswitch LED is illuminated. These are referred to as "DSP Bank 'A'."
When the #3 button is switched and the LED is out, a second DSP preset may be stored
and recalled for each channel - "DSP Bank 'B'."
NOTE: DSP Bank "B" presets are only accessible when the footswitch is connected to the amplifier. When
the footswitch is not connected, only DSP Bank "A" is accessable.
100VAC: T4A
120VAC: T3A
230/240VAC: T1.6A
CAUTION:
R E P L AC E F U S E W I T H SAME TYPE AND RATING.
ATTENTION:
R E C H A N G E D E M E M E TYPE.
GTX212
Three-Channel Guitar Amplifier with Advanced DSP
250V
EXTENSION
250V
SPEAKER
250V
TO REDUCE THE RISK O F F I R E ,
UTILISER UN FUSI B L E D E
"LEFT" jack
Switch #1:
LED on = SOLO CH.
LED off = RHTYHM CH.
Only when Switch #2
is activated (LED lit)!
DSP DSP DSP
CHANNEL CHANNEL CHANNEL INSERT
BANK A BANK A BANK A CLEAN CLEAN CLEAN
BANK B BANK B BANK B SOLO/RTHM SOLO/RTHM SOLO/RTHM
FOOTSWITCH FOOTSWITCH FOOTSWITCH
"RIGHT" jack
Switch #2: Switch #3:
LED on = SOLO/ LED on = DSP
RHYTHM CH. BANK "A"
LED off = CLEAN LED off = DSP
CH. BANK "B"
9