Congratulations! You are now the proud owner of the Crate GT3500H ShockWave three-channel guitar amplifier. This rugged ampli- fier combines outstanding features with serious clean and dis- torted sounds. The rear panel Effects Loop allows you to con- nect your effects for greater flexibility. Channel switching and reverb may be controlled by means of the supplied CFS3 footswitch.
The Front Panel: 1. POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed). The switch illuminates when the power is on. 2. REVERB: Use this control to adjust the amount of reverb effect: in its fully counterclockwise position the signal will be “dry”...
The Rear Panel: LINE LINE 21. LINE OUT: When using an external effects processor, connect this jack to the input of the effect by means of a shielded signal cable. This jack also doubles as a source for a post-EQ, preamp signal to send your signal to a mixing board, recorder, powered monitor or external amplifier.
System Block Diagram: BUFFER INPUT SOLO RHTM RHTM SOLO SOLO RHYTHM GAIN GAIN CLEAN CHNL MID HIGH SOLO SWITCHING CIRCUIT RHTM SOLO HIGH SHAPE REVERB POWER DAMPING CIRCUIT RHYTHM/ SOLO/ CLEAN SOLO LEVEL SOLO/ RHYTHM RHYTHM LEVEL LINE LINE SPEAKERS...
GT3500H TECHNICAL SPECIFICATIONS: Output Power Rating Input Impedance Total System Gain Solo Ch Rhythm Ch Clean Ch Maximum Input Signal Accepted Solo Channel Shape Control Rhythm Channel Low Control Mid Control High Control Clean Channel Low Control Mid Control High Control Power Requirements Size and Weight The GT3500H is covered with a durable Tolex material: wipe it clean with a lint-free cloth.