Playing Audio Via Bluetooth - iHome iBN24 Instruction Manual

Using Bluetooth: Pairing Your Device (cont'd)
"iHome iBN24" should appear on your device's menu. If "Not Paired", "Not Connected" or similar
message appears, tap on "iHome iBN24" to complete pairing. If your device asks for a password, enter
1234 on the keyboard of your device. If no device is paired within 2 minutes, the unit will revert to auto
link mode. To retry pairing, press and hold the Bluetooth Pairing Button again.

Playing Audio Via Bluetooth

1. Move the Power ON/OFF Switch to the ON position (right) to listen to audio streamed wirelessly from
your paired iPad, iPhone, iPod or other Bluetooth device.
The blue light will flash as the unit searches for a previously paired device, and then turn solid blue once
a previously paired device is detected.
2. Use the controls on your device to play or pause audio, navigate tracks and control volume from your
Bluetooth device.
3. When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off.
NOTE: Aux-in audio is disabled when Bluetooth audio is playing from a different device.
Using the
7
iBN24