Using The Toolbar - Epson EasyMP Network Projection Operation Manual

Connecting to a Projector on a Network and Projecting
J
Set options
You can make option settings such as the processing method when EasyMP
Network Projection starts.
s "Set options" p.35
K
Save in the profile
Saves the results of a network projector search as a profile.
s "Making a Profile" p.18
L
Clear list
Deletes all search results.
M
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
N
Signal intensity (Quick Connection Mode only)
As the Signal intensity increases, so does the number of lit indicators.
O
Profile
You can search for a projector on the network using a profile saved using
Save in the profile.
s "Performing a Search with a Profile"
P
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
Q
Display
Select the display number (when Use multi-display is selected).
s "Projecting the Allocated Images"
p.18
p.32

Using the Toolbar

The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can use
this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projector operated from the toolbar when projecting
from multiple projectors using the distribution function or Multi-
screen display. The indication below the icon shows the projectors that
can be controlled.
ALL indicates that all of the connected projectors can be controlled.
For example, when "1, 3" is displayed, projectors No. 1 and No. 3 can be
controlled.
Click to display the following screen.
A
Select the projector to be controlled.
B
Indicates the No. of an allocated projector. This No. appears under
the icon to indicate the No. of the projector that you can control
from the toolbar.
C
Indicates the status of the projector.
Stop
Stops projection while connected to the projector. A black screen is
projected while stopped.
14