Performing A Search With A Profile; Making A Profile - Epson EasyMP Network Projection Operation Manual

Connecting to a Projector on a Different Subnet
The search results are displayed on the EasyMP Network Projection
projector selection screen.
Provided the target projector has been identified, select that
projector, and then click Connect to establish a connection.
Once you have saved projector information as a profile, you do not
have to specify the relevant details every time you perform a search.

"Making a Profile"

s

Performing a Search with a Profile

You can save a search for a frequently used projector as a profile. A profile
is a file containing all of the information pertaining to a given projector,
such as the projector name, its IP address, and SSID. You can specify a
profile to search for a projector instead of specifying relevant details such as
the IP address and projector name. For example, by creating a group of
profiles for each place where a projector is setup and managing them with
folders, the target projector can be found quickly.
This section explains how to create, edit, and manage a profile.
Making a Profile
Profiles are made by saving search results.
For details on how to edit a previously saved profile, see the following
section.
"Managing a Profile" p.20
s
p.18
a
While the projector is displayed on the EasyMP Network Projection
projector selection screen, click Save in the profile.
The Save in the profile screen is displayed.
b
Enter a Profile name, and then click Add.
Projector information is registered in the profile.
If you have previously saved a profile, you are prompted to confirm
whether or not to overwrite. To save a profile with a different name,
select Save as. If you have created a folder for profiles, one of the
18