Esc/Vp21 Commands; Command List; Communications Protocol - Epson EB-410W User Manual

Multimedia projector
Table of Contents

Advertisement

ESC/VP21 Commands

Command List

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates due to a problem, an error
message is output and a ":" is returned.
Item
Power ON/OFF
ON
OFF
Signal selection
Video
S-Video
A/V Mute ON/OFF
ON
OFF
A/V Mute selection
Black
Blue
Logo
Item
Signal selection
Computer (Auto)
Computer
Component Video
* Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Command
PWR ON
PWR OFF
SOURCE 41
SOURCE 42
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
Command
Computer1
Computer2
Port
Port
SOURCE 1F
SOURCE 2F
SOURCE 11
SOURCE 21
SOURCE 14
SOURCE 24

Communications protocol

• Default baud rate setting:
• Data length:
• Parity:
• Stop-bit:
• Flow control:
• Connector shape:
• Projector input connector:
9600 bps
8 bits
None
1 bit
None
D-Sub 9-pin (male)
RS-232C
66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents