Before First Use; Daily Use - Zanussi ZWG6120K User Manual

Temperature button (Temp.)
Press this button to change the default temper-
ature.
Symbol — cold water.
Spin button (Spin)
With this button you can set one of these op-
tions:
Automatic spin reduction
Set this function to decrease the spin seed to a
half, but not less than 400 rpm.
Rinse hold
Set this function to prevent the laundry creases.
There is a water in the drum when the pro-
gramme is completed.
Super quick button (Super Quick)
Press this button to decrease the programme
duration.

Before first use

Put a small quantity of detergent in the main
wash compartment of the detergent dispenser.
Set and start a programme for cotton at the

Daily use

1. Open the water tap.
2. Connect the mains plug to the mains sock-
et.
3. Put the laundry in the appliance.
4. Use the correct quantity of detergent and
additives.
5. Set and start the correct programme for
the type of laundry and soil.
Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item at a
time. Shake the items before you put
them in the appliance. Make sure not to
put too much laundry in the drum.
3. Close the door.
www.zanussi.com
Set this function for items with light soil or
items to refresh.
Delay start button (Delay Start)
Press this button to delay the start of a pro-
gramme by 9, 6 or 3 hours.
Extra Rinse
Press the button "Spin" and together the but-
ton "Super Quick" for some seconds to add the
rinsing phase to a programme.
The indicator Extra Rinse is on.
This function stays permanently on when you
deactivate the appliance. To remove this func-
tion press the same buttons again.
Use this function for persons allergic to deter-
gents and in areas where the water is soft.
highest temperature without laundry. This re-
moves all possible dirt from the drum and the
tub.
Using the detergent and additives
Caution! Make
sure that no
laundry stays be-
tween the seal and
the door. There is a
risk of water leakage
or damage to the
laundry.
9