Special Features - Tripp Lite SU80KX Specifications

UPS / Power Module 116.8 x 52.1 x 85.6
dimensions in
primary form factor
(height x width x
depth / cm)
Installed whole 0
system maximum
rack depth (cm)
UPS / Power Module 538
weight (lbs)
UPS / Power Module 244.3
weight (kg)
UPS Shipping 55 x 28.5 x 42.5
dimensions (height x
width x depth / inches)
UPS Shipping 139.7 x 72.4 x 108
dimensions (height x
width x depth / cm)
Shipping weight (lbs) 687.8
Shipping weight (kg) 312.3
Cooling method Fans
UPS housing material Steel
ENVIRONMENTAL
Operating +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Temperature Range
Storage Temperature +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Range
Relative Humidity 0 to 95%, non-condensing
COMMUNICATIONS
Communications DB9 Serial; Slot for SNMP/Web interface
interface
PowerAlert software Included
Communications DB9 cabling included
cable
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer Maintains continuous operation without using battery power during brownout/undervoltage conditions to 173-300V
to battery power AC (3-phase, 4-wire, wye). Below this point, output is maintained utilizing reserve battery power
(setpoint)
High voltage transfer Maintains continuous operation without using battery power during overvoltages to 276-477V AC (3-phase, 4-wire,
to battery power wye), reducing output within 1% of nominal. Above this point, output is maintained utilizing reserve battery power
(setpoint)

SPECIAL FEATURES

Cold Start (startup in Cold-start operation supported
battery mode during a
power failure)
High availability UPS Automatic inverter bypass; Hot swappable batteries
features