Tripp Lite SU80KX Specifications

Model #: SU80KX
SmartOnline 80kVA Modular 3-Phase UPS System, On-line Double-Conversion International UPS
Description
Tripp Lite's SU80KX (80kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1
modular architecture and 1+1 parallel capability. In N+1 configuration, the SU80KX provides four self-contained, redundant 20kVA power modules
that can be hot-swapped (load remaining powered) if maintenance is required. In 1+1 configuration , two SU80KX models connected in parallel can
provide fail-safe redundancy (two 80kVA models supporting a 80kVA load) or increased capacity (two 80kVA models supporting a 160kVA load).
Large capacity 80,000VA/64,000W UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC
power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types.
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce less than 3% input total
harmonic distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a
generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 97%) saves money by lowering electricity
consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. Frequency is 50 or 60 Hz
(auto-selectable). SU80KX power modules are housed in a single small-footprint tower compartment. Battery modules (Models BP480V26B and
BP480V40C) are housed in a separate stand-alone hardwired external battery compartment (required for UPS operation/backup battery support;
order separately). Battery runtime can be extended with additional stand-alone hardwired external battery modules. A manual bypass breaker and
an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires
maintenance.
Package Includes
SU80KX UPS System
PowerAlert Software
Instruction manual
Warranty information
Features
N+1 configuration: If maintenance is required, four self-contained, redundant 20kVA power modules can be hot-swapped with the load
remaining powered
1+1 configuration: Two SU80KX can be connected in parallel to provide either fail-safe redundancy or increased capacity
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce low input total
harmonic distortion (THDi)
Low THDi (less than 3%) reduces installation costs by allowing 1:1 generator sizing
Extremely efficient operation (up to 97%) saves money by reducing electricity consumption
True on-line, double-conversion UPS with IGBT technology provides pure sine wave AC output at all times
Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
80,000VA/64,000W power capacity with 3-phase, hardwire input/output connections
Wide input voltage correction range: 173-300V/276-477V AC
Battery modules (Models BP480V26B and BP480V40C) are housed in a separate, stand-alone hardwired external battery compartment
Highlights
80,000 VA (80kVA) 3-phase tower UPS
N+1 redundant modular architecture helps assure 100% availability
1+1 parallel capability allows for system redundancy or increased capacity
Low THDi reduces installation costs by permitting 1:1 generator sizing
3-phase hardwire (220/380V, 230/400V or 240/415V AC, 3-phase, 4-wire +
ground, wye) input/output
IGBT technology and zero transfer time, on-line, double-conversion operation
Runtime is expandable via external battery cabinet options
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com