Electric Ignition - GE JGSP30GER Use And Care Manual

Electric Ignition

Your surface burners are lighted by electric ignition.
eliminating the need for standing pilot lights with
constantly burning t]ames.
In case of a power failure,
burners
on your
match
LO
Use extreme caution when lighting
burners this way.
Surface burners in
use when an electrical power
will continue to operate normally.
failure occurs
To Light a Surface Burner
Push the control knob in and turn
it counterclockwise to LITE.
You will hear a little "clicking"
noise— the sound of the electric
spark igniting the burner.
The lowest
setting of the burner
has a small tlarne to provide
To
simmering capability.
burner the other burners are turned on, [he gas
1
I OW
After the burner ignites, turn {he knob to a(ljust
You may occ~siorl:llly hear the igrritcr licking, even
by drafts or by air
it senses
is distorted.
How to Select Flame Size
Watch the flame, not the knob, as you reduce
heat. The I'l:une size on a gtis burner should match
the cookware you arc using.
10
you
lighted
knob to the LITE
~ \ \ \ \
will
may have to be adjLrsted.
irnd is
Surface Burner Controls
Knobs th:i( turn the surt:~ce burners on irnd 011. tire
marked as to
which burners (hey control.
knobs on the left control the left I'rent and lctt
burners. The two knobs on the right control the right
After Lighting a Burner
Check to
be sure the burner you turned on is the
one you want to use.
Do not
operate a burner for an extended period
cookware on the grate. The finish
of time without
on the grate may chip without cookware to absorb
the heut.
Be sure the burners and grates are coo] before
you place your hand, a pot holder,
FOR SAFE HANDLING OF COOKWARE,
NEVER LET THE FLAME EXTEND UP THE
SIDES OF THE COOKWARE. Any flame
than the bottom of the cookware is wasted and only
serves to heat the handle.
The two
cleaning cloths