Page 1
USER’S MANUAL Model No. WLTL31312.0 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
4. The treadmill is intended for home use only. WESLO dealer, call the telephone number on Do not use the treadmill in any commercial, the front cover of this manual, or see your rental, or institutional setting.
Page 4
20. The heart rate monitor is not a medical 24. Never insert any object into any opening on device. Various factors, including the user’s the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
BEFORE YOU BEGIN Thank you for selecting the new WESLO reading this manual, please see the front cover of this ® CROSSWALK 5.2T treadmill. The CROSSWALK 5.2T manual. To help us assist you, note the product model treadmill offers a selection of features designed to number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
This is normal. If http://productvideo.co/ there is an oily substance on the treadmill, wipe assembly/kmart/weslo it off with a soft cloth and a mild, non-abrasive or use your mobile cleaner. phone or smartphone to read the QR code at the • Left parts are marked “L”...
Page 8
2. Set the console assembly face down on a soft surface to avoid scratching it. Console Wire Bracket Identify the Right Handrail (33), which has a Connector large hole in the location shown. Hold the Right Handrail near the console assembly. Large Hole Next, insert the console wire into the large hole...
Page 9
4. With the help of a second person, hold the con- sole assembly near the Right Upright (54). Connect the Wire Harness (39) to the console Console wire. See the inset drawing. The connectors Assembly should slide together easily and snap into place.
Page 10
7. Attach the Latch Housing (48) to the Left Upright (53) with two M4.2 x 18mm Screws (58); start both Screws, and then tighten both of them. 8. Attach the Left Upper Body Arm (105) to the Left Upright (53) with two 1/4" x 3 1/2" Screws (103), two 1/4"...
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same circuit.
Page 12
CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 13. To use the man- ual mode, see page 13. To use a preset workout, The treadmill console offers a selection of features see page 15. designed to make your workouts more effective.
Page 13
HOW TO TURN ON THE POWER the manual mode by pressing the Workout Select button repeatedly until only zeros appear in the IMPORTANT: If the treadmill has been exposed to displays. cold temperatures, allow it to warm to room tem- perature before turning on the power.
Page 14
The lower left dis- ment is selected, hold down the Stop button, insert play—As you exercise, the key into the console, and then release the the lower left display Stop button. An M for metric kilometers or an E can show the elapsed for English miles will appear in the priority display.
Page 15
HOW TO USE A PRESET WORKOUT for the next segment, the speed setting will flash in the display to alert you and the treadmill will 1. Insert the key into the console. automatically adjust to the new speed setting. The workout will continue in this way until the last seg- See HOW TO TURN ON THE POWER on page 13.
Page 16
HOW TO USE THE UPPER BODY ARMS HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, you can change As you walk on the treadmill, you can hold the hand- the incline of the treadmill. There are two incline levels. rails or use the upper body arms.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Remove the key and unplug the power cord. Before moving the treadmill, fold it as described at the CAUTION: You must be able to safely lift 45 lbs. (20 left.
TROUBLESHOOTING Most treadmill problems can be solved by follow- b. Make sure that the power cord is plugged in. If the ing the simple steps below. Find the symptom that power cord is plugged in, unplug it, wait for five applies, and follow the steps listed.
Locate the Reed Switch (89) and the Magnet (62) c. Your treadmill features a walking belt coated with on the left side of the Pulley (71). Turn the Pulley high-performance lubricant. IMPORTANT: Never until the Magnet is aligned with the Reed Switch. apply silicone spray or other substances to Make sure that the gap between the Magnet the walking belt or the walking platform unless...
Page 20
b. If the walking belt slips when walked on, first SYMPTOM: The upperbody arms squeak during remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walk- a.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. WLTL31312.0 R0712B Key No. Qty. Description Key No. Qty. Description M10 x 110mm Bolt Frame M10 x 58mm Bolt Base M4.2 x 13mm Tek Screw Left Upright M4.2 x 16mm Screw Right Upright M8 Star Washer Idler Roller Warning Decal Motor Belt...
Page 23
Key No. Qty. Description Key No. Qty. Description 1/4" Flat Washer Left Upper Body Arm Cage Nut Right Upper Body Arm 1/4" x 3 1/2" Screw – User’s Manual #10 x 3/4" Screw Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual)