Kenmore 148.16156210 Use & Care Manual page 27

For each door, insert bottom hinge pin into hole on bottom panel. Push down on top hinge pin to insert
into hole in bottom corner of control panel. Adjust magnets on the bottom panel and front beam to
align the magnets with doors, and then tighten magnet screws.
Left Door
Right Door
Install the Heat Diffusers, Cooking Grates, Side Burner Grate and Warming Rack
Position the heat diffusers, cooking grates, side burner grate and warming rack as shown. NOTE: The
diffuser edges fit into slots at front and back of burner box. The rectangular hole in cooking grate goes
to the front.
Remove battery cap and insert AA battery with positive pole facing out. Replace cap.
Warming Rack
Cooking Grate
Side Burner Grate
Heat Diffuser
AA Battery
27