Changing The Camera Settings - Sanyo VDC-DP9575P Manual For Remote Operation

Changing the Camera Settings

Clicking on the control panel displays the on-screen camera configuration menu. You can change
the monitoring and operation preferences stored in the camera through the network connection.
MEMO:
The menus displayed depend on the camera model. For details, refer to the instruction manual supplied
with the camera.
The camera configuration
buttons
Use the camera configuration buttons on the control panel to change the preferences.
• To select a menu
Click / to move the cursor up/down. Move
the cursor to locate the menu item you want to
change.
• To change the setting value
Click / repeatedly to switch the value until
the desired value is displayed.
• To open the submenu
y
Menu items with mark have a submenu for
detailed settings.
Move the cursor to your desired menu and click
to open the submenu.
• To return to the previous screen
Click / to move the cursor to [MENU] at the
bottom of the submenu, set the value to "BACK",
and click .
English
·SYNC ·SYNC SYNC
BLC BLC BLC
IRIS IRIS IRIS
WHITE BALANCE WHITE BALANCE WHITE BALANCE
AGC GAIN AGC GAIN AGC GAIN
GAMMA GAMMA GAMMA
SHUTTER SHUTTER SHUTTER
APERTURE APERTURE APERTURE
DAY/NIGHT DAY/NIGHT DAY/NIGHT
OPTION OPTION OPTION
PRESET PRESET PRESET
MENU MENU MENU
• To exit from the menu
Click / to move the cursor to [MENU] at the
bottom of the menu, make sure that the value is set
to "END" (or change to "END" if "BACK" is
displayed), and click
• To reset the values to the factory settings
Click / to move the cursor to [PRESET], set
the value to "ON", and click
21
("admin" only)
INT INT INT
OFF OFF OFF
SET SET SET y y y
ATW ATW ATW
NORM NORM NORM
0.45 0.45 0.45
60 60 60
HIGH HIGH HIGH
AUTO y AUTO y AUTO y
SET SET SET y y y
OFF OFF OFF
END END END
.
.