Flow Of Camera Operation Through To Network Operation; Accessing The Camera; Changing The Camera Settings - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Flow of Camera Operation through to Network Operation

Perform the following procedures according to the detailed instructions given in the supplied "Manual for Remote Operation by Network
Connection".

1 Accessing the camera

Enter your user name and password, and then select a language you want to display on the screen.
User name: admin
Password: admin
2 Displaying live video from the camera on the main screen
3 Configuring the administration settings
Using the [MAIN SETTINGS] screen for an administrative user, configure the detailed settings for administration.
When you access the camera for the first time, be sure to perform the settings on the [CLOCK SETTINGS] screen.

4 Changing the camera settings

Changes in the camera settings can be made through the network connection.
MEMO: • After you turn on the power, wait approximately one minute before network connection is established.
• If you have to configure TCP/IP settings for your PC, refer to the supplied "Manual for Remote Operation by Network Connection" from
page 4 onward.
49
5
5
5