Table of Contents
Advertisement
Hiding Partial Image <PRIVACY MASK>
Privacy Masking Setting (continued)
3
Specify the masking size and press the SET
button.
SIZE
111
111
• From the datum point at the upper left corner of the area, the
size can be scaled up or down, as well as side to side.
RReturns to the "MASK NO.SELECT" screen.
To repeat a masking setting, repeat steps from
■ To preview the entire specified "MASK NO."
Select "PREVIEW" and press the SET button.
To return to the previous screen, press the SET button.
(Example: 4 maskings)
MEMO:
MASK 1
2
When multiple masking positions
overlap, the masking setting with the
22
smaller "MASK NO." will be preceded.
3333
22
111
3333
111
4
4
3
4
27
■ To cancel the masking setting
■ To change the previously specified masking setting
SET
R
4
1
to 3.
Change "ON" of the MASK number to "OFF" in "MASK NO.SELECT"
screen.
Choose "ON" instead of "OFF" in "MASK NO.SELECT" screen, and
press the SET button.
After canceling the previous masking setting, set the masking
position again.
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
The specified masking position appears on the screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
Advertisement
Table of Contents
