Table of Contents
Advertisement
Adjusting White Balance <WHITE BALANCE>
AWC SETTING (One-Push Adjustment)
1
Select "AWC LOCK" – "SET".
·AWC LOCK
GO TO MWB
·AWC LOCK
(SET)
2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
White paper or wall
RThe cursor "q" lights off, and white balance adjustment will
start. The adjustment will end after about 2 seconds when "q"
lights again.
• If the adjustment does not yield a satisfactory result, press the
SET button again.
17
AWC SETTING
SET
SET
y
SET
■ To perform fine adjustment of color
In the "AWC SETTING" screen, select "GO TO MWB" – "SET", and
press the SET button.
R The "MWB SETTING" screen appears. Specify values manually.
(See next page)
MEMO: Transferring to the "MWB SETTING" through "GO TO MWB",
white balance mode (see page 16) will be changed to
"MWB".
3
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
Advertisement
Table of Contents
