Jenn-Air Expressions W30400 Use And Care Manual page 10

'The of Day Clock
When electrical power is supplied or after power interruption, the last clock time
displayed before power was interrupted will flash. Time will advance and continue to
flash until clock is reset.
</
2. Touch appropriate number pads.
To set Time of Day
1. Touch
Clock Pad.
Indicator word TIME will flash and time digits will appear in the Display. (If more
than five seconds elapse between touching
Clock Pad
and touching a number
pad, the Clock Pad must be touched again in order to set clock.)
2. Touch the appropriate number pads until correct time of day appears in Display.
Note:
Five seconds after touching the number pads, the time of day will
automatically be entered.
IMPORTANT
l
To recall time of day when another time function is showing: Touch
Clock Pad.
0 Clock time cannot be changed when oven has been programmed for Timed
Bake, Timed Convect Bake, Timed Convect Roast or Self-clean. Cancel program
before reprogramming clock.
10