Epson ColorPage EPL-C8200 Quick Reference page 5

6. Hold the handle at the top of the photoconductor
unit and gently pull it all the way out.
7. Take the new photoconductor unit out of its
package and unwrap the protective sheet while
holding the handle as shown below.
c
Caution:
Be sure not to scratch or touch the surface
of the drum.
When replacing the photoconductor unit,
avoid exposing it to room light any longer
than necessary.
8. Hold the handle on top of the photoconductor unit
and place the unit on the guide rails. Insert it all the
way into the printer.
c
Caution:
Be sure not to touch the surface of the drum.
9. Turn the small lever to the left.
5 5 5 5