Epson ColorPage EPL-C8200 Quick Reference page 17

Messages Description
Image Optimum There is insufficient memory to
print the page at the specified
print quality. The printer
automatically lowers the print
quality so that it can continue
printing. If the printout is not
acceptable, try simplifying the
page by limiting the number of
graphics or reducing the
number and sizes of fonts.
Turn off the printer then resend
the print data.
Turn the Image Optimum
setting off on the SelecType
Config menu
Insert Oil Roll The fuser oil roll is not installed.
Insert The photoconductor unit is not
Photocondctr installed, or is installed
incorrectly. Turn off the printer,
then install or reinstall the
photoconductor unit.
Insert Waste T Box The waste toner collector is not
installed.
Insert XXX The indicated (XXX) paper
source is open. Close it.
XXX:
The selected
paper source is
indicated.
Messages Description
Invalid HDD A fatal error occurred on the
Hard Disk Drive. Replace with a
normal Hard Disk Drive.
Invalid PS3 A PostScript 3 ROM module
that cannot be used on this
printer is installed.
Irregular Density You have tried to print at an
overly high density. The printer
stops loading paper to prevent
printer damage. You must
clear jammed paper from the
MP tray or paper path unit.
Maintenance Some part inside the printer
Req XXXX should be replaced. Contact
your dealer and inform them of
XXXX:
the number (XXXX) that
Any number is
appears.
indicated.
Manual Feed The printer is waiting for media
XXX YYYY to be inserted manually.
XXX:
The selected
paper source is
indicated.
YYYY:
The selected
paper size is
indicated.
17 17 17 17