Epson ColorPage EPL-C8200 Quick Reference page 18

Messages Description
Mem Overflow The printer has insufficient
memory to execute the
current task. To correct the
error, press the Continue
button on the control panel. If
the message remains, reset the
printer. You can also clear this
message by turning the printer
off, waiting 10 seconds, and
then turning it back on.
Menus Locked This message appears if you try
to change a printer setting
when the buttons have been
locked.
Need Memory The printer has insufficient
memory to execute the
current task. Expand printer
memory.
Oil Roll Near There is very little oil remaining
Empty in the fuser oil roll. Early
replacement with new fuser oil
roll is recommended.
Outbin Select Printouts are output not to the
Error specified Outbin but to
another bin due to a printing
restriction.
Messages Description
Paper Out XXX There is no paper in the
YYYY specified paper source (XXX).
Load paper of the indicated
XXX:
size (YYYY) into the source.
The selected
paper source is
indicated.
YYYY:
The selected
paper size is
indicated.
Paper Set XXX The paper loaded in the
YYYY specified paper source (XXX)
does not match the required
XXX:
paper size (YYYY). Replace the
The selected
loaded paper with the correct
paper source is
size and press Continue.
indicated.
If you press Continue without
YYYY:
replacing the paper, the
The selected
printer will print on the loaded
paper size is
paper even though it does not
indicated.
match the required size.
Paper Unit Open The paper path unit is open.
Close it.
Photocondctr The installed photoconductor
Trouble unit has a problem. Turn off the
printer, then remove the
photoconductor unit and
install the new
photoconductor unit.
18 18 18 18