Epson Stylus Photo User Manual page 32

4. Open the ink cartridge packages. Next, remove only the
yellow tape seals from each cartridge as shown below.
5. Lower the cartridges into their holders with the labels face-up
and the arrow marks pointing to the rear. The color
cartridge, which is larger, goes on the right and the black
ink cartridge goes on the left.
Note:
Install both ink cartridges. If either of the cartridges is not
installed, the printer will not work.
2-8
Getting Started
black ink cartridge
(S020093)
Caution:
q You must remove the yellow tape seals from the
cartridges. If you attempt to print using a cartridge
with this tape seal still attached, the cartridge may
become unusable.
q Do not remove the tape seals from the bottom of the
cartridges; otherwise, ink will leak.
color ink cartridge
(S020110)
black
color