Loading Special Paper and Other Media
When loading special paper distributed by EPSON, read the
instruction sheets packed with your special media first and
keep the following in mind.
q Make sure the printable surface of the paper is face up
when loading media into the sheet feeder. See the
instruction sheets packed with the media to determine
which side is the printable surface. Some media features cut
corners to help identify the correct loading direction, as
shown below.
q Make sure the paper stack fits under the edge guide tab
and the arrow mark, both of which are located on the inside
surface of the left edge guide. Basic loading capacity for
special media is explained below.
6-4
Printing on Special Paper
cut corner
printable surface