Charging Ink - Epson Stylus Pro 7600 Reference Manual

Note:
❏ If WRONG CARTRIDGE is displayed on the LCD panal, insert the
cleaning cartridge into the slot.
❏ If INSERT CARTRIDGE IN CORRECT SLOT is displayed on the
LCD panel, insert the draining cartridge into the slot #X.
4. After confirming that REMOVE DRAINING CARTRIDGE is
displayed on the LCD panel, set the ink lever in the up
position and remove the Draining cartridge.
This completes the draining of the ink. Now you are going to
charge the new ink.
Note:
If you select #1 MAT: #2 MAT or #1 PHOTO: #2 LBK in step 8 "Selecting
a set of ink cartridges", the printer moves to the status explained in step
3 of "Draining the Ink". Repeat the procedure in steps 3 to 4 of "Draining
the Ink" for a second ink replacement.

Charging ink

Follow the steps below to insert the set of black ink cartridges you
selected in step 8 of "Selecting a set of ink cartridges" and the other
cartridges.
1. After confirming that INSERT ALL INK CARTRIDGES is
displayed on the LCD panel, insert all cartridges into their
specified slots, then set the ink lever in the down position.
The printer starts ink charging and INK CHARGING xxx% is
displayed on the LCD panel.
205