Power Supply And Charging The Battery; At Home; In The Car; End Of Charging Procedure - Pioneer AVIC-S1 User Manual

User's manual AVIC-S1
2.1

Power supply and charging the battery

2.1.1

At home

2.1.2

In the car

2.1.3

End of charging procedure

- 12 -
Having unpacked your navigation system the battery will be flat.
You must connect the device to an external power source in order
to charge the battery.
Once you have connected the device to an external power supply,
you can use it even if the battery is flat.
1. Connect the smaller end of the 220 V charging cable to the
respective jack on the bottom of the navigation device.
2. Insert the other plug in a socket.
The diode for the charging status of the battery to the left of
the screen lights up orange.
1. Install the cradle as described in its manual.
2. Place the device in the cradle.
The diode for the charging status of the battery to the left of
the screen lights up orange.
As soon as the diode lights up green, the battery is completely
charged.
Caution: Prior to the first full charge, do not disconnect the
device from the power supply until it has charged completely!
Otherwise you could damage the battery.
Power supply and charging the battery