Resetting The Microprocessor; Output Setting Of The Dvd Player - Pioneer DEQ-P7000 Operation Manual

Section
Before You Start
01

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after
installation.
• If the unit fails to operate properly.
• When strange or incorrect messages appear
on the display.
• To reset the microprocessor, press the
RESET button on the unit with a pen tip or
other pointed instrument.

Output setting of the DVD player

When connecting Pioneer DVD player such as
DVH-P7000R, make DIGITAL OUTPUT
(Setting for digital output) and OUTPUT
SELECTION (Setting digital and analog audio
output) as follows:
Function
DIGITAL OUTPUT
OUTPUT SELECTION
Refer to the DVD player manual for details on
how to make those settings.
Important
• Be sure to set the correct position. If not, no
audio can be outputted.
4
En
Setting
Dolby D/LPCM
48KHz