Items That Users Can Operate - Pioneer AVIC-HD3II Operation Manual

Chapter
03 Basic Operation
2 Touch [Options].
3 Touch the desired items to change the
route calculation conditions and then
touch [OK].
The route is recalculated, and "Route confir-
mation screen" appears.
When a single route is calculated, the system
searches for the route that meets these condi-
tions as closely as possible.
p A single route is calculated in the following
cases:
— When a waypoint is set
— When a route is set through voice recogni-
tion
— When auto reroute is carried out

Items that users can operate

Settings marked with an asterisk (*) show that
these are default or factory settings.
Route Condition
This setting controls how the route should be
calculated by taking into account the time or
the distance or the main road.
Determine which condition takes priority for
route calculation.
[Fast]*:
Calculate a route with the shortest travel time
to your destination as a priority.
[Short]:
Calculate a route with the shortest distance to
your destination as a priority.
30
Engb
[Main Road]:
Calculate a route that passes major arterial
road as a priority.
Avoid Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
[Off]*:
Calculate a route that may include toll roads
(including toll areas).
[On]:
Calculate a route that avoids toll roads (includ-
ing toll areas).
p The system may calculate a route that in-
cludes toll road even if [On] is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
[Off]*:
Calculate a route that may include ferries.
[On]:
Calculate a route that avoids ferries.
p The system may calculate a route that in-
cludes ferry way even if [On] is selected.
Avoid Motorway
This setting controls whether motorways may
be included in the route calculation.
[Off]*:
Calculate a route that may include motorways.
[On]:
Calculate a route that avoids motorways.
p The system may calculate a route that in-
cludes motorway even if [On] is selected.
Time restrictions
This setting controls whether streets or
bridges have traffic restrictions during a cer-
tain time should be taken into account.
p If you want to set your route to avoid
opened bridges, select [On].
[On]*:
Calculate a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
[Off]:
Calculate a route while ignoring traffic restric-
tions.