Assembly - NordicTrack Gx 2.7 Bike Manual

ASSEMBLY

•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you  nish all assembly steps.
•• Left parts are marked “"L”" or “"Left”" and right parts
are marked “"R”" or “"Right.”"
•• To identify small parts, see page 7.
1. Go to www.nordictrackservice.com/
registration on your computer and register
your product.
•• activates your warranty
•• saves you time if you ever need to contact
Customer Care
•• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
1-800-TO-BE-FIT (1-800-862-3348) and register
your product.
2. Using a flat screwdriver, remove the
Shield Cover (26) from the Left and Right
Shields (37, 58).
Remove and discard the shipping screws and
the shipping tube (not shown) on the rear of the
Frame (50), if necessary.
Set a sturdy piece of packing material under the
rear of the Frame (50). Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Identify the Rear Stabilizer (44), which has a
handle.
Attach the Rear Stabilizer (44) to the Frame (50)
with two M8 x 70mm Screws (46).
Remove the packing material from under the
rear of the Frame (50).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
37, 58
44
46
8
26
50