Pioneer DVH-P500UB Operation Manual page 15

Operating this unit
Using the remote control operation
mode switch
There are three remote control operation
modes on the remote control. If you want to
operate this unit by remote control, turn the
mode switch to DVH mode. In this case, both
the head unit's buttons and the remote control
can control this unit.
DVH mode operation
When operating this unit by remote control,
the mode is normally switched to DVH.
! The thumb pad on the remote control can
perform the same operations as
MULTI-CONTROL on the head unit.
DVD mode operation
If you switch the mode to DVD, the thumb pad
and 0 to 10 operations are changed for the
DVD player.
% When you want to operate the follow-
ing functions, switch the mode to DVD:
! When operating the DVD menu by using
the thumb pad. (Refer to Operating the DVD
menu on page 25.)
! When operating the PBC menu by using 0
to 10. (Refer to PBC playback on page 25.)
! When specifying title or track by using 0 to
10. (Refer to Specifying title on page 26 and
Specifying track on page 26.)
! When operating the DVD setup menu by
using the thumb pad. (Refer to Setting up
the DVD player on page 46.)
S-DVD mode operation
Set to S-DVD mode if the separately sold DVD
player or multi-DVD player is controlled by this
remote control.
S-DVD mode operations are basically the
same as DVD mode operations.
Section
02
15
En