12
SERVICE WORK ON THE CHASSIS
–
Position the fork legs.
Info
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
Position bleeder screws
B00809-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
602724-10
–
Tighten screw
Guideline
Screw, top steering head
602723-11
–
Tighten screw
Guideline
Screw, top steering stem
602723-10
–
Tighten screws
Guideline
Screw, top triple clamp
602723-12
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Position the brake line, wiring harness and clamp. Mount and tighten screws
B00798-12
toward the front.
4
.
5
.
3
.
6
.
7
M8
.
9
M8
15 Nm
(11.1 lbf ft)
M20x1.5
12 Nm (8.9 lbf ft)
M8
20 Nm
(14.8 lbf ft)
M8
20 Nm
(14.8 lbf ft)
.
8
25 Nm
Loctite
(18.4 lbf ft)
63
®
243™
.
bk