KTM 125 EXC EU Owner's Manual page 106

15 ELECTRICAL SYSTEM
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
101407-10
(SIX DAYS)
–
Remove screws
–
Pull the speedometer upward out of the holder.
602746-10
–
Using a coin, turn protection cap
it.
–
Remove speedometer battery
–
Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
602748-10
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
602747-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set kilometers or miles. (
–
Adjust the speedometer functions. (
–
Set the clock. (
and turn all the way clockwise using a coin.
2
.
1
all the way counterclockwise and remove
2
.
3
p. 128)
and turn all the way clockwise using a coin.
2
p. 103)
p. 20)
p. 21)
p. 21)
p. 101)
104