Programming Further Clerk Functions - Casio SE-S400 User Manual

Advanced programmings and registrations

Programming further clerk functions

This section explains how you can set further programming for clerks such as
setting the register in training mode or setting commission rates given to clerks. In
the training mode, the register operates normally but the results will not be stored
in the memory. You can use this feature for getting to know the operations of the
cash register for yourself or for newly hired clerks.
Step
1
Turn the Mode switch to PGM position and select [System
Setting] then press F
2
Enter and press
3
programming mode.
3
Enter 2 -digit clerk number followed by 07. The "07" is the
identification code for further program of clerks. Then press
o key. The example on the right is for programming to clerk
number 10.
4
Referring the following tables, input the set code you wish
to program and press
is for setting a commission rate.
5
Enter the program code and press
ample on the right is for setting 8.5% to commission rate 1
and 5% to commission 2.
6
If you wish to set the same program to the next clerk
number, perform the step 5 again. when you set to another
clerk (not next clerk number), repeat steps 3 through 5.
5
Press key to complete the settings.
o
Set code 67 (Training mode)
Training mode
Must be "00000"
Example 1: To set the clerk number 15 as a clerk being trained.
Press 3o1507o100000Fo
Set code 68 (Commission rates)
Commission rate 1 (integer)
Commission rate 1 (decimal)
Commission rate 2 (integer)
Commission rate 2 (decimal)
key.
key to set the register in the
o
key. The example on the right
o
F key. The ex-
Description
Description
Operation
>▪▪▪▪▪>F
3o
1007o
(Clerk no.)
68o
(set code)
08500500F
(program code)
o
Selection
No = 0
Yes = 1
ººººº
Selection
00 to 99
00 to 99
00 to 99
00 to 99
Program code
B
D6
D5 D4 D3 D2 D1
Program code
BB
D8 D7
BB
D6 D5
BB
D4 D3
BB
D2 D1
E-89