Table of Contents
Advertisement
Advanced programmings and registrations
Programming further clerk functions
This section explains how you can set further programming for clerks such as
setting clerks' secret number, setting the register in training mode or setting com-
mission rates given to clerks. In the training mode, the register operates normally
but the results will not be stored in the memory. You can use this feature for
getting to know the operations of the cash register for yourself or for newly hired
clerks.
„ Setting check number for clerk interruption and clerks' secret number
Step
1
Turn the Mode switch to PGM position and select [System
Setting] then press
F
2
Enter
and press
3
programming mode.
3
Enter 2 -digit clerk number followed by 07. The "07" is the
identification code for further program of clerks. Then press
key. The example on the right is for programming to
o
clerk number 10.
4
Enter the program code and press
ample on the right is for setting check number "123456" for
clerk interruption and clerk's secret number "7890".
5
If you wish to set the same program to the next clerk
number, perform the step 4 again. When you set to another
clerk (not next clerk number), repeat steps 3 and 4.
6
Press
key to complete the settings.
o
Program code for check number for clerk interruption and clerks' secret number
Check number for clerk interruption
Clerks' secret number
key.
key to set the register in the
o
key. The ex-
F
Description
Operation
>
>
▪▪▪▪▪
3o
1007o
(Clerk no.)
1234567890
(program code)
F
o
Selection
Check number
Secret number
E-115
F
Program code
BBBBBB
D10 D9 D8 D7 D6 D5
BBBB
D4 D3 D2 D1
Advertisement
Chapters
Table of Contents
