Effects Toolbar - Sony Pro 10 User Manual

Effects toolbar

The Effects toolbar contains buttons corresponding to all Sound Forge built-in XFX™ plug-ins.
Acoustic Mirror Adds environmental coloration to your
existing recordings. For more information, see
Acoustic Mirror effects?
Amplitude Modulation Applies a sinusoidal or square-
shaped periodic gain to the input signal. For more
information, click the Help button ( ) in the effect dialog.
Chorus Simulates multiple audio sources from a single
sound. For more information, click the Help button ( ) in the
effect dialog.
Multi-Tap Delay Creates a delay with up to eight delay-
taps spaced anywhere within 2.5 seconds of the original
sound. For more information, click the Help button ( ) in the
effect dialog.
Simple Delay Adds a delayed copy of the audio signal to
the file. For more information, click the Help button ( ) in
the effect dialog.
Distortion Simulates the overloading of an amplifier. For
more information, click the Help button ( ) in the effect
dialog.
Graphic Dynamics Applies compression, expansion, and
limiting to affect the dynamic range of an audio file. For
more information, click the Help button ( ) in the effect
dialog.
Multi-Band Dynamics Allows compression and limiting to
be placed on up to four different frequency bands. For
more information, click the Help button ( ) in the effect
dialog.
Envelope Forces the amplitude envelope of a waveform to
match a specified envelope shape. For more information,
see Envelope on page 210.
What are the
on page 215.
Flange/Wah-Wah Mixes a modulated delay signal with the
original signal. For more information, click the Help button
( ) in the effect dialog.
Gapper/Snipper Removes/inserts sections of silence at
regular intervals to create unusual effects. For more
information, click the Help button ( ) in the effect dialog.
Noise Gate Removes signals below a set amplitude
threshold. For more information, click the Help button ( ) in
the effect dialog.
Pitch Bend Creates a modified sound envelope that
corresponds to increasing or decreasing the pitch of a
sound file over time. For more information, see
page 211.
Pitch Shift Changes the pitch of a selection with or
without preserving the duration of the file. For more
information, click the Help button ( ) in the effect dialog.
Resonant Filter Restricts the range of a sound using low-
pass, band-pass, or high-pass filtering, and then boosts
and adds oscillation to the resonant frequency. For more
information, click the Help button ( ) in the effect dialog.
Reverb Simulates the acoustics of different environments.
For more information, click the Help button ( ) in the effect
dialog.
Vibrato Creates periodic pitch modulation in an audio file.
For more information, click the Help button ( ) in the effect
dialog.
Wave Hammer Acts as a classic compressor and volume
maximizer. For more information, see
Hammer plug-in? on page 227.
LEARNING THE SOUND FORGE PRO WORKSPACE
Bend on
What is the Wave
41
|