Triggering Playback From Additional Internal/External Midi Devices; Advantages Of External Midi Controllers - Sony Pro 10 User Manual

6.
Type 1 in the Channel box and C4 in the Note box. A small musical note appears adjacent to the "Wow" region in the Regions List
to indicate that a trigger has been configured.
A small musical note
indicates a region trigger
7.
Repeat steps 4 through 6, providing each region with a unique MIDI trigger.
Using region playback triggers
1.
From the Options menu, choose MIDI In/Out, and choose Trigger from MIDI Timecode from the submenu. A check mark appears
adjacent to the command, indicating it is active and the software is ready to receive MIDI commands.
2.
Click C4 on the MIDI Keyboard. The "Wow" region plays.
3.
Click other trigger keys on the MIDI Keyboard and observe how this feature can be used to play regions on cue or quickly rearrange
an audio file.
Note:
Only one region can be played at any given time. Overlapping causes the active region's playback to be interrupted and the new
region's playback to begin.

Triggering playback from additional internal/external MIDI devices

The basic concepts of MIDI routing and triggering from the Sound Forge MIDI Keyboard described in previous sections apply to any
hardware or software device capable of generating MIDI commands. Follow the same basic steps to trigger playback:
1.
Install and configure the MIDI controller (refer to the product-specific documentation for installation procedures).
2.
Set up MIDI input synchronization. For more information, see
3.
Configure the MIDI triggers to respond to the corresponding controls on the controller. For more information, see
MIDI trigger on page 254.

Advantages of external MIDI controllers

In addition to simple playback, MIDI commands can be used to control a wide array of the Sound Forge navigation and editing
functions. In fact, a quick look at the Event drop-down list in the MIDI Triggers dialog can provide you with an idea of the power of MIDI
commands used in conjunction with Sound Forge software.
Using external MIDI controller presets
Sound Forge system presets support the sequencer, cursor, dial, and function buttons on the following external MIDI controllers:
• Roland MCR-8 Multi-Controller
• JLCooper Media Control Station 2
The system presets for these controllers allow you to perform the following actions:
• Move the cursor using the controller's dial.
• Drop markers by clicking the dial.
• Zoom in and out of the waveform using the cursor keys (vertically and horizontally).
• Start and stop audio playback using the sequencer controls.
Note:
Users of the aforementioned external MIDI controllers need not limit themselves to the default configurations of Sony Creative
Software Inc.
256
| CHAPTER 16
Turning on MIDI input synchronization on page 254.
Configuring the