Triggering Region Playback - Sony Pro 10 User Manual

Starting playback
1.
From the Options menu, choose MIDI In/Out, and choose Trigger from MIDI Timecode from the submenu. A check mark appears
adjacent to the command, indicating that it is active and the software is ready to receive MIDI commands.
2.
Click the C4 key on the MIDI Keyboard.
The Voiceover.pca file is played in its entirety.
Resetting MIDI triggers
Once set, MIDI triggers are not permanent. They can be edited or deleted as needed.
1.
From the Options menu, choose MIDI Triggers. The MIDI Triggers dialog is displayed.
2.
From the Preset drop-down list, choose Reset all triggers to (none) and click OK.

Triggering region playback

Frequently, it is preferable to use a MIDI device to control the triggering of the individual regions within a file. As in the previous
example, the MIDI Keyboard will be used to demonstrate this function.
Note:
Before performing this procedure, reset all triggers. For more information, see
Configuring region playback triggers
1.
Display and configure the MIDI Keyboard. For more information, see
2.
Set up the MIDI input synchronization. For more information, see
3.
Open the Voiceover.pca file and display its Regions List.
4.
Select the "Wow" region.
5.
From the Trigger drop-down list, choose Note On - Play.
Resetting MIDI triggers
Configuring the MIDI device
Turning on MIDI input synchronization
on page 255.
on page 254.
on page 254.
WORKING WITH MIDI/SMPTE
255
|