Section 4 − Installation; Important Information Regarding Ce Products (Sold Within The Eu); Specifications; Gun Recommendation Table - Miller Electric SuitCase X-TREME 8VS Owner's Manual

4-1. Important Information Regarding CE Products (Sold Within The EU)

A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.

4-2. Specifications

Welding
Type of
Power
Input
Source
Power
Type
Constant
Voltage (CV)
Open-Circuit/
Arc Voltage, Or Constant
14 − 110 Current (CC)
DC Power
Volts DC
Source Only
* Rated speed range per IEC 60974-5
Maximum gun length is 10 ft. for solid steel .062 in. wire.

4-3. Gun Recommendation Table

Process
GMAW − Hard or Cored Wires
FCAW − Self-Shielding Wires
OM-226 288 Page 12
SECTION 4 − INSTALLATION
Wire Feed Wire
Speed Diameter
Range Range
*
Solid Steel:
.023 − .062 in.
50 − 780 ipm (0.6 − 1.6 mm);
(1.3 − 19.8 Stainless Steel:
mpm) .023 − .052 in.
Depending On (0.6 − 1.3 mm);
Arc Voltage Flux Cored:
.030 − .062 in.
(0.8 − 1.6 mm)
Input
Max. Wire
Welding IP
Circuit Rating
Capacity
Rating
330 Amperes
14 lb (6.4 kg),
At 60% 23
8 in (203 mm)
Duty Cycle
Bernard Q300 or Q400
ce-emc 3 2011-09
Overall
Spool
Dimensions
Length: 18 in.
(457 mm)
Width: 7-1/4 in.
(184 mm)
Height: 12-3/4 in.
(324 mm)
Gun
FC-1260
Dura-Flux
Weight
28 lb
(13 kg)