Placing Jumper Links - Miller Electric Subarc DC 1000 Owner's Manual

4-15. Placing Jumper Links

1
Tools Needed:
3/8 in.
!
Disconnect and lockout/tag-
out input power before
installing or moving jumper
links.
Check input voltage available at
site.
1 Jumper Link Label
Check label − only one is on unit.
2 Jumper Link
Move jumper links to match input
voltage, and label on unit.
Close and secure access door, or
go on to Section 4-16.
2
Do not overtighten
jumper link nuts.
Ref. 802 295
OM-229 253 Page 27