Miller Electric Welder/Generator Brochure & Specs

Miller Du-Op
Heavy Industrial Applications
Pipe Welding
Structural
Quick
Specs
The Power of Blue
Multi-arc welding is here! One
dependable engine and two high-
performance arcs allow operators
to work independent of each other.
It's a one-of-a-kind, go-anywhere
engine drive.
Increase profits with this multi-arc
machine by completing even your
most demanding jobs in half the
time compared to conventional
engine-driven welders. With two
arcs in one engine drive, fewer
machines are required for a job.
Double the amperage output
with a switch that parallels both
outputs to a single side. This
provides a safe and easy way to
run large electrodes, stud weld,
or carbon-arc gouge.
5,500 watts of AC generator
power independent of welding
output. Two 120 V, 20 A GFCI
duplex receptacles. Two 230 V,
20 A duplex receptacles.
®
Processes
Stick (SMAW)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)
Single Weld Mode:
3/8 in (9.5 mm) Carbons
Dual Weld Mode:
1/4 in (6.4 mm) Carbons
.
®
Welder/generator is warranted by Miller for 3 years, parts and labor.
Engine is warranted by Deutz for 2 years.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Output Range
Single Weld Mode: (Right side) CC/DC 30 – 600 A
Dual Weld Mode: (Both sides) CC/DC 15 – 300 A
Weld Output Rated at 104°F (40°C)
Single Weld Mode: 550 A at 30 VDC, 40% Duty Cycle
Dual Weld Mode: 275 A at 31 VDC, 40% Duty Cycle
Generator Output Rated at 104°F (40°C)
5,500 Watts Peak — 4,000 Watts Continuous
Weight
Net: 2115 lb (959 kg) Ship: 2150 lb (975 kg)
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Issued May 2008 • Index No. ED/10.9
Engine-Driven
Welder/Generator
CV/DC 10 – 32 A
Two 14-pin remote controls can
be used for precise adjustment
of amperage or voltage along
with contactor.
Hot Start ™ provides positive stick
electrode starts to make it easy
to start all types of electrodes.
Weld meters — digital ammeter
and presettable voltmeter allow
monitoring of welding output for
each welder.
Arc control (DIG) allows the arc
characteristics to be changed for
specific applications and electrodes.
Smooth running 7018 or stiffer,
more penetrating 6010 electrodes.
Thermal overload protection
prevents machine damage if the
duty cycle is exceeded or airflow
is blocked.
Web Site
www.MillerWelds.com