Live - Roland A-300 Pro Control Manual

Live

If you're using Live, make the following settings.
The explanation here uses Live 8 as an example. The procedure might differ if you're using a different version.
Operation of the A-PRO
1
Choose PLAY mode (see "Performing (Play
mode)" in the owner's manual.)
2 Operation of the A-PRO
Press the [
the cursor to "CTRL MAP" in the display.
The display shows the number of the currently selected control map.
Operation of the A-PRO
3
Turn the [VALUE] knob to select number 12.
4
Start up Live 8.
5
Open the "Preferences" dialog box.
Windows users
In the [Options] menu, click [Preferences...].
Mac OS X users
In the [Live] menu, click [Preferences...].
6
In the left side of the "Preferences" dialog box, click the [MIDI Sync]
tab, and make the following settings.
Control Surface
1 Mackie Control
7
Close the "Preferences" dialog box.
] button or [ ] button to move
Input
A-PRO (A-PRO 2)
Functions Assigned to the Controllers
Refer to p. 11.
Troubleshooting
Values, such as that for pan, change even though you didn't adjust
them
Make sure that knobs [R1]–[R9] are in the center position.
Encoder Simulate is assigned to Knobs [R1]–[R9]. If knobs [R1]–[R9] are not at the center
position, control messages will continue to be transmitted from the A-PRO.
You can control PLAY or STOP, but not Volume or Pan
Check the track that is set to "channel 1."
Pressing the [B1] button or [B2] button will switch the tracks that are assigned to sliders
[S1]–[S8] and knobs [R1]–[R8]. It is not necessarily the case that [R1] and [S1] are
assigned to track 1.
Control Map Guide
7