Microtek ScanWizard Industry Reference Manual page 66

To load a scan job to the Scan Job Queue,
1.
2.
3.
4.
To remove a scan job from the Scan Job Queue,
1.
2.
3.
New name auto given if the name already exists
When you load or save scan jobs, you may check or uncheck the "New name
auto given if the name already exists" option. Suppose the scan jobs already
exist, if you check this check box, the number suffix is automatically appended
as a new scan job. If unchecked, the existing scan jobs are overwritten.
62 ScanWizard Industry Reference Manual
Click the Load/Save button to open the Job Template Manager window..
Switch to the folder where the scan job is stored.
Highlight the scan job to be loaded at the left column of the window.
Before loading a new scan job, you may remove your existing scan jobs
from the right column
Click the Add>> button to load the scan jobs from a selected folder to the
Scan Job Queue.
Click the Load/Save button to open the Job Template Manager window..
Highlight the scan job to be removed at the right column of the window.
Click the Remove or Remove all button to remove the scan job from the Scan
Job Queue.